Routerboard setup

Read our latest blog to give you some help getting things going.MikroTik RouterOS is very powerful, but to get started, it is also very simple.One disadvantage of using HotSpot is that its usually requires your client to open up his browser to log in before he can use your service.I hav setup hotspot with redius. everything is ok. but some prob are disturb me.Someone told me that he is using cross over cable to connect to clients.

Howto Recover Mikrotik ADMIN account Forgotten Password

Dynamic queue donot create automatically for bypassed mac users.My name is raza from peshawar. currently i am on job as network admin in an ISP of university of about 65 departments with 136Mbps link from HEC.Mikrotik hAP AC Lite Tower RB952Ui-5ac2nD -TC Wi-Fi AC Router International ver.

Look at most relevant Mikrotik routerboard sxt 5 setup websites out of 15 at MetricsKey.You would require Minimum Level 4 License (Which supports Max 200 Active Users Sessions).There are 3 ethernet ports on the AccessPoint and one on the Client.To limit user for 30 days, you have to use user manager base billing solution.On all APs is set up dhcp relay and DHCP server is located on hotspot.

Thaks for article,,this is article the best for learning about mikrotik.Visit Mikrotik WIKI and forum, they are the best source of knowledge.How Do I Set Up WDS Using MikroTik Firstly, I would like to describe, what WDS actually is.Friend of mine told me to use ip address of gateway as primary DNS.I had a requirement that I wanted to use the Mikrotik as a Switch with a Trunk and Multiple Vlans and each Vlan.Finally, If there is any best suggestion, please let me know.

Mikrotik Routerboard hAP RB951Ui-2nD 5xPort Wireless Router (replace 951-2n).Mikrotik - Setup as wireless bridge. Decided to use a Mikrotik routerboard 411AR as Wireless bridge and connect a local switch in the end.

Use specific Pool for the shared users who will share bandwidth from defined pool.On Mon, Apr 20, 2015 at 11:16 PM, Syed Jahanzaib Personnel Blog to Share.

Mikrotik bridge setup - Networking - Tom's Hardware

It will Add Default Route to internet which is DSL router ip the main menu on the left select System and then Routerboard.Default SSID and credentials are from the FCC submitted Quick Setup Guide.

Appreciate if you can tell me how to setup or point me to a right direction.Mikrotik Routerboard 2011UiAS-2HnD 1xSFP 10xLAN (replace RB2011UAS-2HnD -IN).Thanks Syed for your response yesterday I will try as you suggested but I have another question: Is it possible to allow free users access only a particular website for a given time period say 1hour daily.

Sir i am new to mikrotek platform i have configured hotspot server but i want to limit bandwidth of my user so how can i do as you mentioned above i have different ip scheme working kindly let me know what to do AS THE SETTING YOU MENTIONED IT DOES NOT WORK GIVE ERROR EVERY TIME.Now open it using any html editor, I always prefer FRONTPAGE for editing HTML pages due to its easy interface.I would like to direct the hotspot user to a custom webpage as well as open a separate popup containing the status.html information.

Mikrotik with Cisco VLAN made easy | Syed Jahanzaib

Mikrotik hEX PoE RB960PGS Router 5xGbit LAN 4xPOE, 128Mb RAM, 800Mhz CPU, USB.

Detailed step-by-step instructions and screenshots are included to make your MIKROTIK router VPN setup as easy as pie.Mini-Router Click here to view data sheet An entirely new class of product in the RouterBOARD lineup, the RB750 is a small five port ethernet router in a nice plastic.

MikroTik RouterBoard, Bridged Ports, Netflow (traffic-flow)

Or the better way is to enable mikrotik web proxy and redirect all users to internal proxy, then using proxy rule, deny your desired websites.

Flashing OpenWrt onto RouterBoard 433AH - VIP

Before attaching mikrotik on the same network. file shareing was working perfectly. but when i have attached mikrotik hotspot on the same network then i m stucked to access my file shareing server by \\server this command.

Mikrotik router (Firewall) - SimpleTelly - Home

You can overcome this problem by creating separate queue for icmp e.g.